Topics › Application Methods

Pesticide Application Methods Questions (Free, with Answers)

10 free practice questions on application methods for the pesticide applicator core exam: broadcast, band, spot, and directed applications, drift prevention, and FIFRA 2(ee). Every question has an explanation. These are original questions written from the federal core standard, not actual exam items.

1. A band application is:

Answer: D. Band treatments cover narrow strips, reducing the total pesticide used compared with broadcast treatment.

2. Spot treatment means:

Answer: D. Spot treatments target localized infestations, reducing cost and exposure.

3. To reduce drift during an application, you could:

Answer: B. Coarser droplets, lower release height, and appropriate weather all reduce off-target movement.

4. Under federal rules, applying soil or non-soil fumigants or making aerial applications of restricted-use pesticides requires:

Answer: D. 40 CFR 171 requires additional certification for fumigation and aerial application of RUPs (and for sodium cyanide or sodium fluoroacetate predator control).

5. Chemigation (applying pesticides through irrigation systems) requires:

Answer: D. Chemigation labels require specific anti-backflow and interlock devices to prevent contamination of water supplies.

6. Crack-and-crevice treatment is typically used in:

Answer: B. Crack-and-crevice treatment targets pest harborage while minimizing exposed surfaces.

7. Applying a pesticide at a HIGHER rate than the label allows is:

Answer: A. Exceeding labeled rates violates the labeling and can cause injury, illegal residues, and environmental harm.

8. Which of the following is generally permitted under FIFRA even if not specifically listed on the label?

Answer: B. FIFRA allows certain deviations, such as lower rates, less frequent application, or any method not prohibited, as long as the labeling doesn't prohibit them.

9. Before starting an application near homes, schools, or sensitive sites, the applicator should:

Answer: C. Checking the site and meeting label and state notification rules helps protect people and non-target areas.

10. Directed sprays are aimed:

Answer: B. Directed applications place pesticide where it is needed and avoid contact with non-target plant parts.
0 / 0 correct

Full pack: 5 practice tests + cheat sheet

$19 one-time

Pay $19 with PayPal

How delivery works: after paying, go to the After Payment page and tap "I've paid" to open your pack instantly (online tests, PDF and cheat sheet). Details.

More core exam topics